An Official Web Site of the United States Government

Setaside Data

Solicitation Numbersort icon Subject Agency SetAside State Date Zip Description
0040148584 93--Synthetic Belting Department of the Interior Total Small Business Mon, 06/23/2014 (All day) 22182
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040148584 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-74. The associated North American Industrial Classification System (NAICS) code for this procurement is 327999 with a small business size standard of 0.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-07-01 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Yakima, WA 98901

The Bureau of Reclamation requires the following items, Meet or Exceed, to the following:
LI 001: Synthetic Belting for Sunnyside Location per the attached specs.
Intralox Series 1800 or equal, 1, lot;
LI 002: Synthetic Belting for Knudson Location per the attached specs.
Intralox Series 1800 or equal, 1, lot;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

Payment requests must be submitted electronically through the U.S. Department of the Treasury's Internet Payment Platform System (IPP). "Payment requests" means any request for contract financing payment or invoicing payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions-Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov. Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: NONE The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in CCR) will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) within 3-5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

(a) Upon receipt of accelerated payments from the Government, the Contractor shall make accelerated payments to its small business subcontractors under this contract, to the maximum extent practicable and prior to when such payment is otherwise required under the applicable contract or subcontract, after receipt of a proper invoice and all other required documentation from the small business subcontractor. (b) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act. (c) Include the substance of this clause, including this paragraph (c), in all subcontracts with small business concerns, including subcontracts with small business concerns for the acquisition of commercial items.

(a) If an item in this solicitation is identified as ?brand name or equal,? the purchase description reflects the characteristics and level of quality that will satisfy the Government?s needs. The salient physical, functional, or performance characteristics that ?equal? products must meet are specified in the solicitation. (b) To be considered for award, offers of ?equal? products, including ?equal? products of the brand name manufacturer, must? (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by? (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate ?equal? products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation.

Link To Document
Description:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040148584 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-74. The associated North American Industrial Classification System (NAICS) code for this procurement is 327999 with a small business size standard of 0.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-07-01 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Yakima, WA 98901

The Bureau of Reclamation requires the following items, Meet or Exceed, to the following:
LI 001: Synthetic Belting for Sunnyside Location per the attached specs.
Intralox Series 1800 or equal, 1, lot;
LI 002: Synthetic Belting for Knudson Location per the attached specs.
Intralox Series 1800 or equal, 1, lot;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

Payment requests must be submitted electronically through the U.S. Department of the Treasury's Internet Payment Platform System (IPP). "Payment requests" means any request for contract financing payment or invoicing payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions-Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov. Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: NONE The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in CCR) will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) within 3-5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

(a) Upon receipt of accelerated payments from the Government, the Contractor shall make accelerated payments to its small business subcontractors under this contract, to the maximum extent practicable and prior to when such payment is otherwise required under the applicable contract or subcontract, after receipt of a proper invoice and all other required documentation from the small business subcontractor. (b) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act. (c) Include the substance of this clause, including this paragraph (c), in all subcontracts with small business concerns, including subcontracts with small business concerns for the acquisition of commercial items.

(a) If an item in this solicitation is identified as ?brand name or equal,? the purchase description reflects the characteristics and level of quality that will satisfy the Government?s needs. The salient physical, functional, or performance characteristics that ?equal? products must meet are specified in the solicitation. (b) To be considered for award, offers of ?equal? products, including ?equal? products of the brand name manufacturer, must? (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by? (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate ?equal? products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation.

Link To Document
0040148584_01 93--Synthetic Belting Department of the Interior Total Small Business Tue, 07/29/2014 (All day) 22182
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040148584_01 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-75. The associated North American Industrial Classification System (NAICS) code for this procurement is 327999 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-08-06 12:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Yakima, WA 98901

The Bureau of Reclamation requires the following items, Meet or Exceed, to the following:
LI 001: Synthetic Belting for Sunnyside Location per the attached specs.
Intralox Series 1800 or equal, 1, lot;
LI 002: Synthetic Belting for Knudson Location per the attached specs.
Intralox Series 1800 or equal, 1, lot;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

Payment requests must be submitted electronically through the U.S. Department of the Treasury's Internet Payment Platform System (IPP). "Payment requests" means any request for contract financing payment or invoicing payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions-Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov. Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: NONE The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in CCR) will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) within 3-5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

(a) Upon receipt of accelerated payments from the Government, the Contractor shall make accelerated payments to its small business subcontractors under this contract, to the maximum extent practicable and prior to when such payment is otherwise required under the applicable contract or subcontract, after receipt of a proper invoice and all other required documentation from the small business subcontractor. (b) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act. (c) Include the substance of this clause, including this paragraph (c), in all subcontracts with small business concerns, including subcontracts with small business concerns for the acquisition of commercial items.

(a) If an item in this solicitation is identified as ?brand name or equal,? the purchase description reflects the characteristics and level of quality that will satisfy the Government?s needs. The salient physical, functional, or performance characteristics that ?equal? products must meet are specified in the solicitation. (b) To be considered for award, offers of ?equal? products, including ?equal? products of the brand name manufacturer, must? (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by? (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate ?equal? products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation.

Link To Document
Description:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040148584_01 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-75. The associated North American Industrial Classification System (NAICS) code for this procurement is 327999 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-08-06 12:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Yakima, WA 98901

The Bureau of Reclamation requires the following items, Meet or Exceed, to the following:
LI 001: Synthetic Belting for Sunnyside Location per the attached specs.
Intralox Series 1800 or equal, 1, lot;
LI 002: Synthetic Belting for Knudson Location per the attached specs.
Intralox Series 1800 or equal, 1, lot;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

Payment requests must be submitted electronically through the U.S. Department of the Treasury's Internet Payment Platform System (IPP). "Payment requests" means any request for contract financing payment or invoicing payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions-Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov. Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: NONE The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in CCR) will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) within 3-5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

(a) Upon receipt of accelerated payments from the Government, the Contractor shall make accelerated payments to its small business subcontractors under this contract, to the maximum extent practicable and prior to when such payment is otherwise required under the applicable contract or subcontract, after receipt of a proper invoice and all other required documentation from the small business subcontractor. (b) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act. (c) Include the substance of this clause, including this paragraph (c), in all subcontracts with small business concerns, including subcontracts with small business concerns for the acquisition of commercial items.

(a) If an item in this solicitation is identified as ?brand name or equal,? the purchase description reflects the characteristics and level of quality that will satisfy the Government?s needs. The salient physical, functional, or performance characteristics that ?equal? products must meet are specified in the solicitation. (b) To be considered for award, offers of ?equal? products, including ?equal? products of the brand name manufacturer, must? (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by? (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. (c) The Contracting Officer will evaluate ?equal? products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation.

Link To Document
0040148937 31--CHILL WATER PUMP PARTS Department of the Interior Total Small Business Wed, 08/20/2014 (All day) 22182
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040148937 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 311999 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-08-25 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Grand Coulee, WA 99133

The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following:
LI 001: BEARING, CHILL WATER PUMP, AURORA NO. 068-0452-647, OR EQUAL., 2, EACH;
LI 002: BEARING, CHILL WATER PUMP, AURORA NO.068-1905-647, OR EQUAL., 2, EACH;
LI 003: BUSHING, CHILL WATER PUMP, AURORA NO. 136-1423-208, OR EQUAL., 4, EACH;
LI 004: SLEEVE, PACKING, CHILL WATER PUMP, AURORA NO. 756-0641-644, OR EQUAL., 4, EACH;
LI 005: IMPELLER, CHILL WATER PUMP, AURORA NO. 443-2106-225, 2, EACH;
LI 006: WEAR, RING, IMPELLER, CHILL WATER PUMP, AURORA NO. 676-1047-208, OR EQUAL., 4, EACH;
LI 007: RING, CHILL WATER PUMP, CASE, AURORA NO. 676-1744-208, OR EQUAL., 4, EACH;
LI 008: RING, CHILL WATER PUMP, BEARING, RETAINING, AURORA NO. 676-0440-008, OR EQUAL., 2, EACH;
LI 009: GASKET, CHILL WATER PUMP, CASE, AURORA NO. 364-1256-598, OR EQUAL., 2, EACH;
LI 010: SEAL, CHILL WATER PUMP, GREASE, AURORA NO. 712-6322-653, OR EQUAL., 2, EACH;
LI 011: SEAL, CHILL WATER PUMP, GREASE, AURORA NO. 712-6321-653, OR EQUAL., 2, EACH;
LI 012: SLINGER, CHILL WATER PUMP, AURORA NO. 764-1012-475, OR EQUAL., 2, EACH;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

See Attached Contract Clauses

Technical Acceptability ranks higher than Delivery and Price. Technical Acceptability and Delivery, when combined, rank higher than Price in Evaluation Criteria. Price must be fair and reasonable. Clauses 52.212-02, Evaluation-Commercial, WBR 1452.215-71, Use and Disclosure of Proposal Information and 52.232-99, Providing Accelerated Payment to Small Business Subcontractors (Deviation), apply to this RFQ.

Per FAR Clause 52.211-06, Brand Name or Equal, if quoting other than specified, you MUST attach enought literature, including picture and Specifications, for our evaluation team to determine if it meets the criteria to be considered acceptable as a replacement. Failure to do so may disqualify your quote.

Link To Document
Description:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040148937 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 311999 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-08-25 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Grand Coulee, WA 99133

The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following:
LI 001: BEARING, CHILL WATER PUMP, AURORA NO. 068-0452-647, OR EQUAL., 2, EACH;
LI 002: BEARING, CHILL WATER PUMP, AURORA NO.068-1905-647, OR EQUAL., 2, EACH;
LI 003: BUSHING, CHILL WATER PUMP, AURORA NO. 136-1423-208, OR EQUAL., 4, EACH;
LI 004: SLEEVE, PACKING, CHILL WATER PUMP, AURORA NO. 756-0641-644, OR EQUAL., 4, EACH;
LI 005: IMPELLER, CHILL WATER PUMP, AURORA NO. 443-2106-225, 2, EACH;
LI 006: WEAR, RING, IMPELLER, CHILL WATER PUMP, AURORA NO. 676-1047-208, OR EQUAL., 4, EACH;
LI 007: RING, CHILL WATER PUMP, CASE, AURORA NO. 676-1744-208, OR EQUAL., 4, EACH;
LI 008: RING, CHILL WATER PUMP, BEARING, RETAINING, AURORA NO. 676-0440-008, OR EQUAL., 2, EACH;
LI 009: GASKET, CHILL WATER PUMP, CASE, AURORA NO. 364-1256-598, OR EQUAL., 2, EACH;
LI 010: SEAL, CHILL WATER PUMP, GREASE, AURORA NO. 712-6322-653, OR EQUAL., 2, EACH;
LI 011: SEAL, CHILL WATER PUMP, GREASE, AURORA NO. 712-6321-653, OR EQUAL., 2, EACH;
LI 012: SLINGER, CHILL WATER PUMP, AURORA NO. 764-1012-475, OR EQUAL., 2, EACH;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

See Attached Contract Clauses

Technical Acceptability ranks higher than Delivery and Price. Technical Acceptability and Delivery, when combined, rank higher than Price in Evaluation Criteria. Price must be fair and reasonable. Clauses 52.212-02, Evaluation-Commercial, WBR 1452.215-71, Use and Disclosure of Proposal Information and 52.232-99, Providing Accelerated Payment to Small Business Subcontractors (Deviation), apply to this RFQ.

Per FAR Clause 52.211-06, Brand Name or Equal, if quoting other than specified, you MUST attach enought literature, including picture and Specifications, for our evaluation team to determine if it meets the criteria to be considered acceptable as a replacement. Failure to do so may disqualify your quote.

Link To Document
0040149019 66--Geophysical Equipment Department of the Interior Total Small Business Tue, 07/08/2014 (All day) 22182
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040149019 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-75. The associated North American Industrial Classification System (NAICS) code for this procurement is 333132 with a small business size standard of 0.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-07-10 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Charleston, WV 25301

The US Geological Survey requires the following items, Exact Match Only, to the following:
LI 001: Draw works SFPD 326000C, 1, EA;
LI 002: Depth Counter 334551, 1, EA;
LI 003: Cable Head 112000, 2, EA;
LI 004: Mud Pit Electrode 140562, 1, EA;
LI 005: 8144 E-Logs w/GR, no DEV 336700B, 1, EA;
LI 006: 8074 Arm Caliper, w/o gamma, 1, EA;
LI 007: 9512 Slim Induction with GR 337000A, 1, EA;
LI 008: 9722 EM Flow Meter, 1, EA;
LI 009: 9751 Fluid Sampler 319500, 1, EA;
LI 010: 8804 Televiewer, No GR 332004B, 1, EA;
LI 011: 9323 3-4-5 ft spaced fw sonic calibration, 1, EA;
LI 012: Cable, DWKS bypass (20") 214002, 1, EA;
LI 013: Calibration Ring, conductivity 293821, 1, EA;
LI 014: Calibration box sp and normals 335230, 1, EA;
LI 015: Tripod, 1000 meter rated 315701, 1, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, US Geological Survey intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. US Geological Survey is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

The offeror must provide within its offer the number of days required to make delivery after it receives a purchase order from the buyer. No partial shipments are permitted unless specifically authorized at the time of award.

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34.

The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

Link To Document
Description:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040149019 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-75. The associated North American Industrial Classification System (NAICS) code for this procurement is 333132 with a small business size standard of 0.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-07-10 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Charleston, WV 25301

The US Geological Survey requires the following items, Exact Match Only, to the following:
LI 001: Draw works SFPD 326000C, 1, EA;
LI 002: Depth Counter 334551, 1, EA;
LI 003: Cable Head 112000, 2, EA;
LI 004: Mud Pit Electrode 140562, 1, EA;
LI 005: 8144 E-Logs w/GR, no DEV 336700B, 1, EA;
LI 006: 8074 Arm Caliper, w/o gamma, 1, EA;
LI 007: 9512 Slim Induction with GR 337000A, 1, EA;
LI 008: 9722 EM Flow Meter, 1, EA;
LI 009: 9751 Fluid Sampler 319500, 1, EA;
LI 010: 8804 Televiewer, No GR 332004B, 1, EA;
LI 011: 9323 3-4-5 ft spaced fw sonic calibration, 1, EA;
LI 012: Cable, DWKS bypass (20") 214002, 1, EA;
LI 013: Calibration Ring, conductivity 293821, 1, EA;
LI 014: Calibration box sp and normals 335230, 1, EA;
LI 015: Tripod, 1000 meter rated 315701, 1, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, US Geological Survey intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. US Geological Survey is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

The offeror must provide within its offer the number of days required to make delivery after it receives a purchase order from the buyer. No partial shipments are permitted unless specifically authorized at the time of award.

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34.

The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

Link To Document
0040149313 28--COUPLING Department of the Interior Total Small Business Fri, 05/30/2014 (All day) 22182
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040149313 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-73. The associated North American Industrial Classification System (NAICS) code for this procurement is 333999 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-06-18 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Grand Coulee, WA 99133

The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following:
LI 001: COUPLING, HALF, LOWER DRIVE. WOODWARD GOVERNOR CO REFERENCE #11002-88, PART NO. 110089, OR EQUAL., 2, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

SEE ATTACHED CALUSES

The following factors shall be used to evaluate offers:
TECHNICAL ACCEPTABILITY, DELIVERY AND PRICE*
*Technical Acceptability ranks higher than Delivery and Price. Technical Acceptability and Delivery, when combined, rank higher than Price in Evaluation Criteria. Price must be fair and reasonable.

Link To Document
Description:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040149313 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-73. The associated North American Industrial Classification System (NAICS) code for this procurement is 333999 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-06-18 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Grand Coulee, WA 99133

The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following:
LI 001: COUPLING, HALF, LOWER DRIVE. WOODWARD GOVERNOR CO REFERENCE #11002-88, PART NO. 110089, OR EQUAL., 2, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

SEE ATTACHED CALUSES

The following factors shall be used to evaluate offers:
TECHNICAL ACCEPTABILITY, DELIVERY AND PRICE*
*Technical Acceptability ranks higher than Delivery and Price. Technical Acceptability and Delivery, when combined, rank higher than Price in Evaluation Criteria. Price must be fair and reasonable.

Link To Document
00401493860040159170 59--PHENOLIC INSULATION Department of the Interior Total Small Business Wed, 08/20/2014 (All day) 22182
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 00401493860040159170 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 423330 with a small business size standard of 100.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-08-25 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Grand Coulee, WA 99133

The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following:
LI 001: G-11 (Glass Cloth / Epoxy Resin) These glass-epoxy laminates are specified for their extremely high strength and high dimensional stability over temperature. G-11 are used for terminal boards, high humidity applications, electrical and electronic test equipment and electric rotor insulation. G-11 are difficult to cut or machine and may require special equipment. G-11 is a better insulator and can take higher temperatures. FR-4 is a fire-retardant G-10 glass-epoxy laminate that is used primarily in the printed circuit board industry. PHYSICAL Density (lb/in?) 0.065 (g/cm?)1.80 Water Absorption, 24 hrs (%) 0.20 MECHANICAL Tensile Strength (psi) -lengthwise 43,000 -crosswise 37,000 Flexural Strength (psi) -lengthwise 80,000 -crosswise 70,000 Flexural Modulus (Kpsi) -lengthwise 3,000 -crosswise 2,700 IZOD Notched Impact (ft-lb/in) -lengthwise 12.0 -crosswise 9.0 Compressive Strength (psi) 63,000 Hardness, Rockwell M M112 THERMAL Coefficient of Linear Thermal Expansion (x 10-5 in./in./?F) -lengthwise 0.72 -crosswise 0.83 Max Operating Temp (?F / ?C) 329/165 Thermal Conductivity (BTU-in/ft?-hr-?F) 2.0 (x 10-4 cal/cm-sec-?C) 7.0 Flammability Rating H-B ELECTRICAL Dielectric Strength (V/mil) short time, 1/8" thick 900 Dielectric Constant at 1 MHz 4.5 Dissipation Factor at 1 MHz 0.020 Arc Resistance (sec) 120

STANDARD SIZE, LAMINATED HIGH PRESSURE, FINE WEAVE COTTON FIBER BASE, PHENOLIC RESIN, BUFFED ALL SIDES HIGH MACHINABILITY, MIL-P-15035C, TYPE FBE, UNIVERSAL PLASTICS OR EQUAL, PROVIDE WRITTEN CERTIFICATION SPECIFYING MANUFACTURER, GRADE # AND DATA SHEETS SHOWING COMPLIANCE., 2, SHEET;
LI 002: NEMA GRADE 11, 36 IN X 48 IN OR 48 IN X 48 IN STANDARD SIZE, HIGH PRESSURE LAMINATE, FINE WEAVE CONTINUOUS GLASS WOVEN FABRIC BASE IMPREGNATED WITH AN EXPOXY RESIN BINDER, NATURAL (YELLOW TO AMBER), CERTIFIES TO MIL-I-24768/3, BUFFED ALL SIDES, HIGH MACHINABILITY, TYPE FBE, UNIVERSAL PLASTICS OR EQUAL, PROVIDE WRITTEN CERTIFICATION SPECIFYING MANUFACTURER, GRADE # AND DATA SHEETS SHOWING COMPLIANCE., 1, SHEET;
LI 003: G-11 (Glass Cloth / Epoxy Resin) These glass-epoxy laminates are specified for their extremely high strength and high dimensional stability over temperature. G-11 are used for terminal boards, high humidity applications, electrical and electronic test equipment and electric rotor insulation. G-11 are difficult to cut or machine and may require special equipment. G-11 is a better insulator and can take higher temperatures. FR-4 is a fire-retardant G-10 glass-epoxy laminate that is used primarily in the printed circuit board industry. PHYSICAL Density (lb/in?) 0.065 (g/cm?)1.80 Water Absorption, 24 hrs (%) 0.20 MECHANICAL Tensile Strength (psi) -lengthwise 43,000 -crosswise 37,000 Flexural Strength (psi) -lengthwise 80,000 -crosswise 70,000 Flexural Modulus (Kpsi) -lengthwise 3,000 -crosswise 2,700 IZOD Notched Impact (ft-lb/in) -lengthwise 12.0 -crosswise 9.0 Compressive Strength (psi) 63,000 Hardness, Rockwell M M112 THERMAL Coefficient of Linear Thermal Expansion (x 10-5 in./in./?F) -lengthwise 0.72 -crosswise 0.83 Max Operating Temp (?F / ?C) 329/165 Thermal Conductivity (BTU-in/ft?-hr-?F) 2.0 (x 10-4 cal/cm-sec-?C) 7.0 Flammability Rating H-B ELECTRICAL Dielectric Strength (V/mil) short time, 1/8" thick 900 Dielectric Constant at 1 MHz 4.5 Dissipation Factor at 1 MHz 0.020 Arc Resistance (sec) 120

HIGH PRESSURE LAMINATE, FINE WEAVE, CONTINUOUS GLASS WOVEN FABRIC BASE IMPREGNATED WITH AN EPOXY RESIN BINDER, NATURAL (YELLOW GREEN TO AMBER), CERTIFIES TO MIL-I-24768/3 OR EQUAL, PROVIDE WRITTEN CERTIFICATION SPECIFYING MANUFACTURER, GRADE # AND DATA SHEETS SHOWING COMPLIANCE., 2, LENGTHS;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

See Attached Contract Clauses

Technical Acceptability ranks higher than Delivery and Price. Technical Acceptability and Delivery, when combined, rank higher than Price in Evaluation Criteria. Price must be fair and reasonable. Clauses 52.212-02, Evaluation-Commercial, WBR 1452.215-71, Use and Disclosure of Proposal Information and 52.232-99, Providing Accelerated Payment to Small Business Subcontractors (Deviation), apply to this RFQ.

Per FAR Clause 52.211-06, Brand Name or Equal, if quoting other than specified, you MUST attach enought literature, including picture and Specifications, for our evaluation team to determine if it meets the criteria to be considered acceptable as a replacement. Failure to do so may disqualify your quote.

Link To Document
Description:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 00401493860040159170 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 423330 with a small business size standard of 100.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-08-25 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Grand Coulee, WA 99133

The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following:
LI 001: G-11 (Glass Cloth / Epoxy Resin) These glass-epoxy laminates are specified for their extremely high strength and high dimensional stability over temperature. G-11 are used for terminal boards, high humidity applications, electrical and electronic test equipment and electric rotor insulation. G-11 are difficult to cut or machine and may require special equipment. G-11 is a better insulator and can take higher temperatures. FR-4 is a fire-retardant G-10 glass-epoxy laminate that is used primarily in the printed circuit board industry. PHYSICAL Density (lb/in?) 0.065 (g/cm?)1.80 Water Absorption, 24 hrs (%) 0.20 MECHANICAL Tensile Strength (psi) -lengthwise 43,000 -crosswise 37,000 Flexural Strength (psi) -lengthwise 80,000 -crosswise 70,000 Flexural Modulus (Kpsi) -lengthwise 3,000 -crosswise 2,700 IZOD Notched Impact (ft-lb/in) -lengthwise 12.0 -crosswise 9.0 Compressive Strength (psi) 63,000 Hardness, Rockwell M M112 THERMAL Coefficient of Linear Thermal Expansion (x 10-5 in./in./?F) -lengthwise 0.72 -crosswise 0.83 Max Operating Temp (?F / ?C) 329/165 Thermal Conductivity (BTU-in/ft?-hr-?F) 2.0 (x 10-4 cal/cm-sec-?C) 7.0 Flammability Rating H-B ELECTRICAL Dielectric Strength (V/mil) short time, 1/8" thick 900 Dielectric Constant at 1 MHz 4.5 Dissipation Factor at 1 MHz 0.020 Arc Resistance (sec) 120

STANDARD SIZE, LAMINATED HIGH PRESSURE, FINE WEAVE COTTON FIBER BASE, PHENOLIC RESIN, BUFFED ALL SIDES HIGH MACHINABILITY, MIL-P-15035C, TYPE FBE, UNIVERSAL PLASTICS OR EQUAL, PROVIDE WRITTEN CERTIFICATION SPECIFYING MANUFACTURER, GRADE # AND DATA SHEETS SHOWING COMPLIANCE., 2, SHEET;
LI 002: NEMA GRADE 11, 36 IN X 48 IN OR 48 IN X 48 IN STANDARD SIZE, HIGH PRESSURE LAMINATE, FINE WEAVE CONTINUOUS GLASS WOVEN FABRIC BASE IMPREGNATED WITH AN EXPOXY RESIN BINDER, NATURAL (YELLOW TO AMBER), CERTIFIES TO MIL-I-24768/3, BUFFED ALL SIDES, HIGH MACHINABILITY, TYPE FBE, UNIVERSAL PLASTICS OR EQUAL, PROVIDE WRITTEN CERTIFICATION SPECIFYING MANUFACTURER, GRADE # AND DATA SHEETS SHOWING COMPLIANCE., 1, SHEET;
LI 003: G-11 (Glass Cloth / Epoxy Resin) These glass-epoxy laminates are specified for their extremely high strength and high dimensional stability over temperature. G-11 are used for terminal boards, high humidity applications, electrical and electronic test equipment and electric rotor insulation. G-11 are difficult to cut or machine and may require special equipment. G-11 is a better insulator and can take higher temperatures. FR-4 is a fire-retardant G-10 glass-epoxy laminate that is used primarily in the printed circuit board industry. PHYSICAL Density (lb/in?) 0.065 (g/cm?)1.80 Water Absorption, 24 hrs (%) 0.20 MECHANICAL Tensile Strength (psi) -lengthwise 43,000 -crosswise 37,000 Flexural Strength (psi) -lengthwise 80,000 -crosswise 70,000 Flexural Modulus (Kpsi) -lengthwise 3,000 -crosswise 2,700 IZOD Notched Impact (ft-lb/in) -lengthwise 12.0 -crosswise 9.0 Compressive Strength (psi) 63,000 Hardness, Rockwell M M112 THERMAL Coefficient of Linear Thermal Expansion (x 10-5 in./in./?F) -lengthwise 0.72 -crosswise 0.83 Max Operating Temp (?F / ?C) 329/165 Thermal Conductivity (BTU-in/ft?-hr-?F) 2.0 (x 10-4 cal/cm-sec-?C) 7.0 Flammability Rating H-B ELECTRICAL Dielectric Strength (V/mil) short time, 1/8" thick 900 Dielectric Constant at 1 MHz 4.5 Dissipation Factor at 1 MHz 0.020 Arc Resistance (sec) 120

HIGH PRESSURE LAMINATE, FINE WEAVE, CONTINUOUS GLASS WOVEN FABRIC BASE IMPREGNATED WITH AN EPOXY RESIN BINDER, NATURAL (YELLOW GREEN TO AMBER), CERTIFIES TO MIL-I-24768/3 OR EQUAL, PROVIDE WRITTEN CERTIFICATION SPECIFYING MANUFACTURER, GRADE # AND DATA SHEETS SHOWING COMPLIANCE., 2, LENGTHS;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

See Attached Contract Clauses

Technical Acceptability ranks higher than Delivery and Price. Technical Acceptability and Delivery, when combined, rank higher than Price in Evaluation Criteria. Price must be fair and reasonable. Clauses 52.212-02, Evaluation-Commercial, WBR 1452.215-71, Use and Disclosure of Proposal Information and 52.232-99, Providing Accelerated Payment to Small Business Subcontractors (Deviation), apply to this RFQ.

Per FAR Clause 52.211-06, Brand Name or Equal, if quoting other than specified, you MUST attach enought literature, including picture and Specifications, for our evaluation team to determine if it meets the criteria to be considered acceptable as a replacement. Failure to do so may disqualify your quote.

Link To Document
0040150246 70--Geologic Software Renewal Department of the Interior Total Small Business Wed, 06/25/2014 (All day) 22182
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040150246 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-74. The associated North American Industrial Classification System (NAICS) code for this procurement is 511210 with a small business size standard of $35.50M.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-06-30 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Denver, CO 80225

The US Geological Survey requires the following items, Brand Name or Equal, to the following:
LI 001: DYNAMIC GRAPHICS, INC., SOFTWARE LICENSE RENEWAL WITH MAINTENANCE AND SUPPORT AGREEMENT: CPU # 049-NLC1, CPU Type: PC , System ID # 001143f11a3b Location: Denver, CO (1) ev_ps-m EarthVision Petroleum Suite; (1) ev_2dxsvp-m 2D Surface Modeling Package - Extended; (1)ev_do-m Map Digitizer (1) ev_gct-m Geographic Coordinate Transformation; (1)ev_nlc-m Network License Controller; (1) ev_2nlc-m Network License Controller (2nd Platform type). BRAND NAME OR EQUAL TO ATTACHED BRAND NAME SALIENT CHARACTERISTICS-Sellers offering other than brand name item shall include all software and firmware to meet or exceed the Salient Characteristics. Software shall meet the attached FISMA and Section 508 Compliance Requirements, 1, Package;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, US Geological Survey intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. US Geological Survey is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

The offeror must provide within its offer the number of days required to make delivery after it receives a purchase order from the buyer. No partial shipments are permitted unless specifically authorized at the time of award.

The selected Offeror must comply with the attached Clauses and Provisions for commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the attached Clauses and Provisions.

The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far.

A seller must have a current registration in the following four databases to receive this award:
1. SAM Requirement The USGS requires registration, including representations and certifications, with the System for Award Management (SAM) prior to receipt of order. Information can be found at www.sam.gov.

2. FEDCONNECT Requirement Awards will be made to vendors registered in the FedConnect database. Vendors may complete registration in FedConnect at https://www.fedconnect.net.
3. IPP Requirement Electronic Invoicing and Payment Requirements - Internet Payment Platform (IPP) APRIL 2011
Beginning May 1, 2011, payment requests for all new awards must be submitted electronically through the U. S. Department of the Treasury's Internet Payment Platform System (IPP). Payment terms for existing contracts and orders awarded prior to May 1 remain the same. The Contractor must use IPP for contracts and orders awarded May 1 and later, and must use the non-IPP invoicing process for those contracts and orders awarded prior to May 1. "Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in FAR 32.905(b), "Payment documentation and process" and the applicable Prompt Payment clause included in this contract. The IPP website address is: https://www.ipp.gov.
The Contractor must use the IPP website to enroll, access and use IPP for submitting requests for payment. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the contracting officer.

(a) In accordance with sections 433 and 434 of Division E of the Consolidated Appropriations Act, 2012 (Pub. L. 112-74), none of the funds made available by the Act may be used to enter into a contract with any corporation that - (1) Was convicted (or had an officer or agent of such corporation acting on behalf of the corporation convicted) of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation, or such officer or agent and made a determination that this further action is not necessary to protect the interests of the Government. (2) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (b) The Offeror certifies that - (1) It is not a corporation that was convicted (or had an officer or agent of such corporation acting on behalf of the corporation convicted) of a felony criminal violation under any Federal law within the preceding 24 months; (2) It is not a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability.

FAR CLAUSE 52.211-6 BRAND NAME OR EQUAL incorporated by Reference.
Manufacturer Information: DYNAMIC GRAPHICS, www.dgi.com
___________________________
GS0110 BRAND NAME OR EQUAL INSERTS (JULY 2001)
Bids including other-than-Brand Name products/services shall include supporting documentation that demonstrates the capabilities of the product/service to meet ALL salient characteristics.
To comply with FAR 52.211-6 Please provide the following information about an other than Brand Name product: Line Item Number _______
BIDDING ON/PROPOSING:
Manufacturer's Name ___________________________
Address, Phone & Website _______________________________________
Brand or Product Name__________________________
Model Name & No. ______________________________

Award evaluation criteria utilized to evaluate Bids is specified in evaluation factors as follows. This evaluation criteria supersedes the evaluation criteria as stated in above instructions, Evaluation Criteria Basis of Award. Evaluation based on lowest price, technically acceptable: To be deemed technically acceptable, the product/service shall meet or exceed the attached Salient Characteristics.

Link To Document
Description:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040150246 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-74. The associated North American Industrial Classification System (NAICS) code for this procurement is 511210 with a small business size standard of $35.50M.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-06-30 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Denver, CO 80225

The US Geological Survey requires the following items, Brand Name or Equal, to the following:
LI 001: DYNAMIC GRAPHICS, INC., SOFTWARE LICENSE RENEWAL WITH MAINTENANCE AND SUPPORT AGREEMENT: CPU # 049-NLC1, CPU Type: PC , System ID # 001143f11a3b Location: Denver, CO (1) ev_ps-m EarthVision Petroleum Suite; (1) ev_2dxsvp-m 2D Surface Modeling Package - Extended; (1)ev_do-m Map Digitizer (1) ev_gct-m Geographic Coordinate Transformation; (1)ev_nlc-m Network License Controller; (1) ev_2nlc-m Network License Controller (2nd Platform type). BRAND NAME OR EQUAL TO ATTACHED BRAND NAME SALIENT CHARACTERISTICS-Sellers offering other than brand name item shall include all software and firmware to meet or exceed the Salient Characteristics. Software shall meet the attached FISMA and Section 508 Compliance Requirements, 1, Package;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, US Geological Survey intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. US Geological Survey is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

The offeror must provide within its offer the number of days required to make delivery after it receives a purchase order from the buyer. No partial shipments are permitted unless specifically authorized at the time of award.

The selected Offeror must comply with the attached Clauses and Provisions for commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the attached Clauses and Provisions.

The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far.

A seller must have a current registration in the following four databases to receive this award:
1. SAM Requirement The USGS requires registration, including representations and certifications, with the System for Award Management (SAM) prior to receipt of order. Information can be found at www.sam.gov.

2. FEDCONNECT Requirement Awards will be made to vendors registered in the FedConnect database. Vendors may complete registration in FedConnect at https://www.fedconnect.net.
3. IPP Requirement Electronic Invoicing and Payment Requirements - Internet Payment Platform (IPP) APRIL 2011
Beginning May 1, 2011, payment requests for all new awards must be submitted electronically through the U. S. Department of the Treasury's Internet Payment Platform System (IPP). Payment terms for existing contracts and orders awarded prior to May 1 remain the same. The Contractor must use IPP for contracts and orders awarded May 1 and later, and must use the non-IPP invoicing process for those contracts and orders awarded prior to May 1. "Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in FAR 32.905(b), "Payment documentation and process" and the applicable Prompt Payment clause included in this contract. The IPP website address is: https://www.ipp.gov.
The Contractor must use the IPP website to enroll, access and use IPP for submitting requests for payment. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the contracting officer.

(a) In accordance with sections 433 and 434 of Division E of the Consolidated Appropriations Act, 2012 (Pub. L. 112-74), none of the funds made available by the Act may be used to enter into a contract with any corporation that - (1) Was convicted (or had an officer or agent of such corporation acting on behalf of the corporation convicted) of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation, or such officer or agent and made a determination that this further action is not necessary to protect the interests of the Government. (2) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (b) The Offeror certifies that - (1) It is not a corporation that was convicted (or had an officer or agent of such corporation acting on behalf of the corporation convicted) of a felony criminal violation under any Federal law within the preceding 24 months; (2) It is not a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability.

FAR CLAUSE 52.211-6 BRAND NAME OR EQUAL incorporated by Reference.
Manufacturer Information: DYNAMIC GRAPHICS, www.dgi.com
___________________________
GS0110 BRAND NAME OR EQUAL INSERTS (JULY 2001)
Bids including other-than-Brand Name products/services shall include supporting documentation that demonstrates the capabilities of the product/service to meet ALL salient characteristics.
To comply with FAR 52.211-6 Please provide the following information about an other than Brand Name product: Line Item Number _______
BIDDING ON/PROPOSING:
Manufacturer's Name ___________________________
Address, Phone & Website _______________________________________
Brand or Product Name__________________________
Model Name & No. ______________________________

Award evaluation criteria utilized to evaluate Bids is specified in evaluation factors as follows. This evaluation criteria supersedes the evaluation criteria as stated in above instructions, Evaluation Criteria Basis of Award. Evaluation based on lowest price, technically acceptable: To be deemed technically acceptable, the product/service shall meet or exceed the attached Salient Characteristics.

Link To Document
0040151850 47--Hose, Pipe, Tube & Fittings Department of the Interior Total Small Business Wed, 08/20/2014 (All day) 22182
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040151850 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 332912 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-08-25 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Grand Coulee, WA 99133

The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following:
LI 001: HOSE, AIR, 3/4 ID X 1-5/16 OD, HEAVY DUTY, 3-BRAID, GENERAL PURPOSE FOR AIR, FLAME RESISTANT, WATER, FUEL AND MILD CHEMICALS, RAYON CORD IMBEDDED INSYNTHETIC RUBBER COMPOUND, SYNTHETIC PLASTIC TUBE AND COVERING THAT RESISTS GASOLINE, OIL, MILD INORGANIC ACIDS AND ALKALIES AND WATER CONTAMINATION, 500 POUNDS MAX WORKING PRESSURE, YELLOW, GOOD YEAR GORILLA USMSHA NO. 2G-14C/14, OR EQUAL., 1500, FOOT;
LI 002: COUPLING, HOSE, STEEL 1/4 INCH HS, 2.22 INCH LONG, CADMIUM PLATED, HANSON MALE PLUG ON ONE END, RIBBED SHANK HOSE ON THE OTHER END, RATED PRESSURE: 2,000 PSI, WORKING PRESSURE CONNECTED: 138 BAR, FURNISH 25 PER PACKAGE, HANSEN PART NO. 16, SERIES 3000 PUSH-TITE, OR EQUAL., 25, EACH;
LI 003: NIPPLE, PIPE, 2 IPS X 3-1/2 INCH GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. MADE IN USA ONLY., 6, EACH;
LI 004: STRAINER Y SEDIMENT, BRONZE, 1 INCH TREADED WITH 3/4 INCH BLOW OFF, CAST BRONZE, 302 STAINLESS STEEL SCREEN, 400 LB PSI WATER, OIL, GAS, END TO END MEASUREMENT: 4-3/4, 2, EACH;
LI 005: NOZZLE, GARDEN, HOSE, BRASS, 3/4 INCH, TWINST STYLE, ADJUSTS FROM SOLID STREAM TO SPRAY, FITS 5/8 INCH AND 3/4 INCH HOSE, FURNISH 10 PER PACKAGE., 30, EACH;
LI 006: NIPPLE, PIPE 2 IPS X 6 INCH GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. MADE IN USA ONLY., 13, EACH;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

See Attached Contract Clauses

Technical Acceptability ranks higher than Delivery and Price. Technical Acceptability and Delivery, when combined, rank higher than Price in Evaluation Criteria. Price must be fair and reasonable. Clauses 52.212-02, Evaluation-Commercial, WBR 1452.215-71, Use and Disclosure of Proposal Information and 52.232-99, Providing Accelerated Payment to Small Business Subcontractors (Deviation), apply to this RFQ.

Per FAR Clause 52.211-06, Brand Name or Equal, if quoting other than specified, you MUST attach enought literature, including picture and Specifications, for our evaluation team to determine if it meets the criteria to be considered acceptable as a replacement. Failure to do so may disqualify your quote.

Link To Document
Description:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040151850 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 332912 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-08-25 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Grand Coulee, WA 99133

The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following:
LI 001: HOSE, AIR, 3/4 ID X 1-5/16 OD, HEAVY DUTY, 3-BRAID, GENERAL PURPOSE FOR AIR, FLAME RESISTANT, WATER, FUEL AND MILD CHEMICALS, RAYON CORD IMBEDDED INSYNTHETIC RUBBER COMPOUND, SYNTHETIC PLASTIC TUBE AND COVERING THAT RESISTS GASOLINE, OIL, MILD INORGANIC ACIDS AND ALKALIES AND WATER CONTAMINATION, 500 POUNDS MAX WORKING PRESSURE, YELLOW, GOOD YEAR GORILLA USMSHA NO. 2G-14C/14, OR EQUAL., 1500, FOOT;
LI 002: COUPLING, HOSE, STEEL 1/4 INCH HS, 2.22 INCH LONG, CADMIUM PLATED, HANSON MALE PLUG ON ONE END, RIBBED SHANK HOSE ON THE OTHER END, RATED PRESSURE: 2,000 PSI, WORKING PRESSURE CONNECTED: 138 BAR, FURNISH 25 PER PACKAGE, HANSEN PART NO. 16, SERIES 3000 PUSH-TITE, OR EQUAL., 25, EACH;
LI 003: NIPPLE, PIPE, 2 IPS X 3-1/2 INCH GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. MADE IN USA ONLY., 6, EACH;
LI 004: STRAINER Y SEDIMENT, BRONZE, 1 INCH TREADED WITH 3/4 INCH BLOW OFF, CAST BRONZE, 302 STAINLESS STEEL SCREEN, 400 LB PSI WATER, OIL, GAS, END TO END MEASUREMENT: 4-3/4, 2, EACH;
LI 005: NOZZLE, GARDEN, HOSE, BRASS, 3/4 INCH, TWINST STYLE, ADJUSTS FROM SOLID STREAM TO SPRAY, FITS 5/8 INCH AND 3/4 INCH HOSE, FURNISH 10 PER PACKAGE., 30, EACH;
LI 006: NIPPLE, PIPE 2 IPS X 6 INCH GALVANIZED STEEL, SCHEDULE 40, WELDED, ASTM A-120. MADE IN USA ONLY., 13, EACH;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

See Attached Contract Clauses

Technical Acceptability ranks higher than Delivery and Price. Technical Acceptability and Delivery, when combined, rank higher than Price in Evaluation Criteria. Price must be fair and reasonable. Clauses 52.212-02, Evaluation-Commercial, WBR 1452.215-71, Use and Disclosure of Proposal Information and 52.232-99, Providing Accelerated Payment to Small Business Subcontractors (Deviation), apply to this RFQ.

Per FAR Clause 52.211-06, Brand Name or Equal, if quoting other than specified, you MUST attach enought literature, including picture and Specifications, for our evaluation team to determine if it meets the criteria to be considered acceptable as a replacement. Failure to do so may disqualify your quote.

Link To Document
0040152068 58--Acoustic Tags Department of the Interior Total Small Business Sat, 07/26/2014 (All day) 22182
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040152068 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-75. The associated North American Industrial Classification System (NAICS) code for this procurement is 334310 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-08-07 11:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be LaCrosse, WI 54603

The US Geological Survey requires the following items, Brand Name or Equal, to the following:
LI 001: Hydroacoustic Technology Inc (HTI) - Brand Name or Equal Acoustic Tags in accordance with the Salient Characteristics in the Attachment. THIS LINE ITEM SHALL HAVE A DELIVERY DATE OF 30 DAYS ARO., 50, EA;
LI 002: Hydroacoustic Technology Inc (HTI) - Brand Name or Equal Acoustic Tags in accordance with the Salient Characteristics in the Attachment. THIS LINE ITEM SHALL HAVE A DELIVERY DATE OF MARCH 2, 2015. THE USGS IS REQUESTING A DELAYED DELIVERY DATE - ON THESE 60 TAGS. FOR STORAGE REASONS, THESE TAGS ARE TO BE DELIVERED MARCH 2, 2015., 60, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, US Geological Survey intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. US Geological Survey is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

The offeror must provide within its offer the number of days required to make delivery after it receives a purchase order from the buyer. No partial shipments are permitted unless specifically authorized at the time of award.

The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far.

FAR Clause 52.211-6 Brand Name or Equal is hereby incorporated by Reference Hydroacoustic Technology Inc 711 NE Northlake Way Seattle, WA 98105 http://www.htisonar.com/

Bids including other-than-Brand Name products/services shall include supporting documentation that demonstrates the capabilities of the product/service to meet ALL salient characteristics and shall provide the following information for each item:
Line Item Number _______
BIDDING ON/PROPOSING:
Manufacturer's Name ___________________________
Address, Phone & Website _______________________________________
Brand or Product Name__________________________
Model Name & No. ______________________________

Refer to the attachment for additional Terms and Conditions.

Lowest evaluated price or cost to the Government will be the determining factor in selection for award between technically acceptable quotations. In order to be considered technically acceptable, if the offeror is proposing acoustic tags different from Hydroacoustic Technology Inc, offeror shall attach a product brochure or specifications on the proposed equipment. The proposed equipment must meet all of the Salient Characteristics listeed in the attachment.

Questions relating to this buy shall be presented by e-mail to not later than close of business 5:00 p.m. MST on July 31, 2014. Questions should be worded so as to avoid disclosing bid strategies or proprietary solutions. The Government will evaluate the questions, and if needed, the buy will be reposted, with the questions received and their associated answers. If further questions arise following the outcome of answers provided to initial questions, the Contracting Officer has sole discretion to determine if a new question closing date will be required. If a new question closing date is approved, the buy will be reposted.

Link To Document
Description:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040152068 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-75. The associated North American Industrial Classification System (NAICS) code for this procurement is 334310 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-08-07 11:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be LaCrosse, WI 54603

The US Geological Survey requires the following items, Brand Name or Equal, to the following:
LI 001: Hydroacoustic Technology Inc (HTI) - Brand Name or Equal Acoustic Tags in accordance with the Salient Characteristics in the Attachment. THIS LINE ITEM SHALL HAVE A DELIVERY DATE OF 30 DAYS ARO., 50, EA;
LI 002: Hydroacoustic Technology Inc (HTI) - Brand Name or Equal Acoustic Tags in accordance with the Salient Characteristics in the Attachment. THIS LINE ITEM SHALL HAVE A DELIVERY DATE OF MARCH 2, 2015. THE USGS IS REQUESTING A DELAYED DELIVERY DATE - ON THESE 60 TAGS. FOR STORAGE REASONS, THESE TAGS ARE TO BE DELIVERED MARCH 2, 2015., 60, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, US Geological Survey intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. US Geological Survey is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

The offeror must provide within its offer the number of days required to make delivery after it receives a purchase order from the buyer. No partial shipments are permitted unless specifically authorized at the time of award.

The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far.

FAR Clause 52.211-6 Brand Name or Equal is hereby incorporated by Reference Hydroacoustic Technology Inc 711 NE Northlake Way Seattle, WA 98105 http://www.htisonar.com/

Bids including other-than-Brand Name products/services shall include supporting documentation that demonstrates the capabilities of the product/service to meet ALL salient characteristics and shall provide the following information for each item:
Line Item Number _______
BIDDING ON/PROPOSING:
Manufacturer's Name ___________________________
Address, Phone & Website _______________________________________
Brand or Product Name__________________________
Model Name & No. ______________________________

Refer to the attachment for additional Terms and Conditions.

Lowest evaluated price or cost to the Government will be the determining factor in selection for award between technically acceptable quotations. In order to be considered technically acceptable, if the offeror is proposing acoustic tags different from Hydroacoustic Technology Inc, offeror shall attach a product brochure or specifications on the proposed equipment. The proposed equipment must meet all of the Salient Characteristics listeed in the attachment.

Questions relating to this buy shall be presented by e-mail to not later than close of business 5:00 p.m. MST on July 31, 2014. Questions should be worded so as to avoid disclosing bid strategies or proprietary solutions. The Government will evaluate the questions, and if needed, the buy will be reposted, with the questions received and their associated answers. If further questions arise following the outcome of answers provided to initial questions, the Contracting Officer has sole discretion to determine if a new question closing date will be required. If a new question closing date is approved, the buy will be reposted.

Link To Document
0040152137 59--CONTROLLER Department of the Interior Total Small Business Wed, 06/11/2014 (All day) 22182
Bids are being solicited under solicitation number 0040152137. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 618088.


GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov.

This requirement is a [ Small Business ] set-aside and only qualified sellers may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-06-24 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Grand Coulee, WA 99133

The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following:
LI 001: CONTROLLER, EX IP ETHERNET READY CONTROLLER WITH FOUR DOOR CONTROL OUTPUTS WITH ENCLOSURE. COMPLIES WITH FEDERAL INFORMATION PROCESSING STANDARDS 140-2. 197 VALIDATED 256 BIT ENCRYPTION. HAS SIXTEEN SUPERVISED INPUTS, FOUR FORM C RELAY OUTPUTS RATED AT 30 VAC/DC, 2.0A, PLUS FOUR OPEN COLLECTOR OUTPUTS, WET OR DRY (NPS INDICATES NO POWER SUPPLY INCLUDED). SOFTWARE HOUSE PART NUMBER: iSTAR EX STAREX004-64-NPS OR EQUAL., 1, EA;
LI 002: CONTROLLER, IP EDGE, FOUR READERS SUPPORTED, MOTHERBOARD ONLY-NO ENCLOSURE. CONTROLLER HAS EIGHT SUPERVISED INPUTS. ALSO HAS TAMPER, AC FAIL AND LOW BATTERY INPUTS, THE CONTROLLER HAS FOUR OUTPUTS AND IS EXPANSION CARD CAPABLE. SUPPORTS FOUR RM READERS AND HAS A LOCAL DISPLAY (LCD). POE (POWER OVER ETHERNET) CAPABLE. SOFTWARE HOUSE PART NUMBER: iSTAR EDGE ESTAR004 OR EQUAL., 2, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.

Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

See attached clauses.

The following factors shall be used to evaluate offers:
TECHNICAL ACCEPTABILITY, DELIVERY AND PRICE*
*Technical Acceptability ranks higher than Delivery and Price. Technical Acceptability and Delivery, when combined, rank higher than Price in Evaluation Criteria. Price must be fair and reasonable.

IF SUBMITTING A QUOTE FOR AN EQUAL, YOU MUST PROVIDE MANUFACTURER'S TECHNICAL LITERATURE FOR REVIEW IN ORDER TO BE CONSIDERED FOR AWARD.

Link To Document
Description:

Bids are being solicited under solicitation number 0040152137. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 618088.


GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov.

This requirement is a [ Small Business ] set-aside and only qualified sellers may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-06-24 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Grand Coulee, WA 99133

The Bureau of Reclamation requires the following items, Brand Name or Equal, to the following:
LI 001: CONTROLLER, EX IP ETHERNET READY CONTROLLER WITH FOUR DOOR CONTROL OUTPUTS WITH ENCLOSURE. COMPLIES WITH FEDERAL INFORMATION PROCESSING STANDARDS 140-2. 197 VALIDATED 256 BIT ENCRYPTION. HAS SIXTEEN SUPERVISED INPUTS, FOUR FORM C RELAY OUTPUTS RATED AT 30 VAC/DC, 2.0A, PLUS FOUR OPEN COLLECTOR OUTPUTS, WET OR DRY (NPS INDICATES NO POWER SUPPLY INCLUDED). SOFTWARE HOUSE PART NUMBER: iSTAR EX STAREX004-64-NPS OR EQUAL., 1, EA;
LI 002: CONTROLLER, IP EDGE, FOUR READERS SUPPORTED, MOTHERBOARD ONLY-NO ENCLOSURE. CONTROLLER HAS EIGHT SUPERVISED INPUTS. ALSO HAS TAMPER, AC FAIL AND LOW BATTERY INPUTS, THE CONTROLLER HAS FOUR OUTPUTS AND IS EXPANSION CARD CAPABLE. SUPPORTS FOUR RM READERS AND HAS A LOCAL DISPLAY (LCD). POE (POWER OVER ETHERNET) CAPABLE. SOFTWARE HOUSE PART NUMBER: iSTAR EDGE ESTAR004 OR EQUAL., 2, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, Bureau of Reclamation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Bureau of Reclamation is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.

Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.

See attached clauses.

The following factors shall be used to evaluate offers:
TECHNICAL ACCEPTABILITY, DELIVERY AND PRICE*
*Technical Acceptability ranks higher than Delivery and Price. Technical Acceptability and Delivery, when combined, rank higher than Price in Evaluation Criteria. Price must be fair and reasonable.

IF SUBMITTING A QUOTE FOR AN EQUAL, YOU MUST PROVIDE MANUFACTURER'S TECHNICAL LITERATURE FOR REVIEW IN ORDER TO BE CONSIDERED FOR AWARD.

Link To Document
CSV

© Copyright 2011 Small Business Administration. All rights reserved.