An Official Web Site of the United States Government

Influence of rheology on deposition behavior of ceramic pastes in direct fabrication systems

Printer-friendly version

Research and Development

  • Link:http://www.osti.gov/bridge/advancedsearch.jsp
  • Source:http://www.osti.gov/rdprojects
  • Resource Type:Conference
  • OSTI Identifier:291154
  • Published Date:2010-02-17
  • Subject:32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION ;42 ENGINEERING NOT INCLUDED IN OTHER CATEGORIES;36 MATERIALS SCIENCE; RHEOLOGY; CERAMICS; SLURRIES; FABRICATION; ELECTRONIC CIRCUITS; DEPOSITION; DRYING; ALUMINIUM OXIDES; INKS
  • Description:Rheology and deposition behavior of four commercially available thick-film inks and an aqueous alumina slurry were investigated using two different slurry-based deposition systems. The first of these deposition systems, a Micropen, is a commercially available system designed for the deposition of electronic thick film circuits. The second system, referred to as a Robocaster, is a developmental system designed to build thick or structural parts. Slurry rheology was seen to have a minor effect on ...Show More
  • Description:Rheology and deposition behavior of four commercially available thick-film inks and an aqueous alumina slurry were investigated using two different slurry-based deposition systems. The first of these deposition systems, a Micropen, is a commercially available system designed for the deposition of electronic thick film circuits. The second system, referred to as a Robocaster, is a developmental system designed to build thick or structural parts. Slurry rheology was seen to have a minor effect on deposition behavior and the bead shape when deposited using the Micropen. The deposition behavior was instead dominated by drying rate; too rapid of a drying rate led to excessive clogging of the tip. Slurry rheology had a greater impact on the shape of beads deposited using the Robocaster. Highly viscous slurries yielded initially well-defined beads, whereas beads deposited using fluid slurries spread quickly. In both cases, significant spreading occurred with time. These observations only held for slurries with slow drying rates. It was observed that very fluid slurries produced well-defined beads when the drying rate was suitably high. ...Show Less
MORE LIKE THIS

Explanation

Based on your search keyword(s), we found other relevant matches across various data sources.

© Copyright 2011 Small Business Administration. All rights reserved.